New Products New Products
Filter
Sort by:
PAWS Complete Vehicle Tag Kit
RH-VTAG KIT

Feature:

  • PAWS is designed to reduce the risk of collision between pedestrians and moving vehicles in your workplace. The system uses the cutting edge Ultra-wideband technology to precisely measure the distance between the vehicles and pedestrians providing highly reliable collision warning.
View Product
FRA-Compliant Rear-End Marking Device — 450 Hour Runtime, 2 mile visibility, IP64
RH-EOT

Feature:

  • The RH-EOT is a dedicated rear-end marking device for identifying the last car of a train, listed by Railhead as FRA approved and compliant with 49 CFR Part 221, using four red LEDs for flashing visibility up to 2 miles across up to 450 hours on two D-cell batteries, with a built-in LED indicator that confirms in daylight that the light is switched on and the photocell is activated, shipping with its mounting bracket and using two D-cell batteries (not included) on a 1-inch-diameter pin that extends 5 inches inside the knuckle and locks with a set screw, placing the lens centerline 51 inches above the top of rail when mounted as specified. Railhead specifically notes the RH-EOT is not intended to replace traditional end-of-train telemetry devices.

    Best use case: Best for FRA-compliant rear-end marking of trains, using a compact, lightweight red flashing LED design with photocell activation, up to 2-mile visibility, and up to 200 hours of runtime on two D-cell batteries.

View Product
230° MOTION-ACTIVATED RECHARGEABLE LOW-PROFILE HEADBAND LIGHT — 450 LM, IPX4, 5 HR RUNTIME
RH-HB450R

Feature:

  • The RH-HB450R is a rechargeable COB headband light built for close-range industrial work. Its 230-degree COB band delivers soft, shadow-free peripheral light, while dual side-mounted XPE LEDs add 269 ft (82 m) of reach. The lamp produces up to 450 lumens with 3 hours of runtime across three modes, and wave-to-activate operation with last-mode memory means gloves stay on. It is USB-C rechargeable, IPX4 sealed, and impact-resistant.

View Product
RECHARGEABLE RIGHT-ANGLE LONG-THROW LIGHT — 1,300 LM, IPX4, HEAVY-DUTY AIRCRAFT-GRADE ALUMINUM BODY — GREAT FOR SHOVING, 83 HR RUNTIME
RH-RT1000R

Feature:

  • The Railhead RH-RT1000R is a compact rechargeable right-angle light built for shove moves, rail inspection, and hands-free field work. The heavy-duty aircraft-grade aluminum body is drop-tested to 3.3 ft (1 m) and sealed to IPX4. The RH-RT1000R delivers up to 1,300 lumens with a focused beam reaching 945 ft, or up to 83 hours of continuous run time on Low. 2 modes are provided, High / Low, and holding the switch dims the output. A full-time battery level indicator is built into the push-button switch, so you always know when it's time to recharge. A magnetic base and magnetic clip lock it to railcars, knuckles, and any steel surface, and the body clip carries it on a vest or pocket. Ships with (2) 18650 lithium-ion rechargeable batteries, a charging base, and cable.

View Product
Vibration-Activated Rechargeable Safety Alarm Light — 1 Mile Visibility, 110 dB Siren, IP64
RH-SL2000R

Feature:

  • The RH-SL2000R is a rechargeable safety alarm light that adds an audible warning channel to coupling and shove operations, pairing 21 amber LEDs behind a 360-degree diamond-cut lens for over 1 mile of visibility with a 110 dB siren, both triggered by an internal vibration sensor that detects a shove or coupling event and sounds for up to three pre-determined cycles before resetting, and recharging in about 4.5 hours through an environmentally sealed magnetic connection on the front of the housing, with a low-battery LED indicator, IP64 protection, and 230 hours of runtime in single-flash mode.

    Best use case: Best for warning workers of unexpected railcar or equipment movement in rail yards, shops, loading docks, warehouses, and industrial plants, combining vibration activation, 360° flashing LEDs, and a 110 dB siren.

View Product
Red LED Forklift Arc Light
RH-ARCRED

Feature:

  • Red LED Forklift Arc Light

View Product
Red LED Overhead Crane Safety Light 9in Spot Line Light
RH-CRANELIGHT

Feature:

  • PROBLEM
    People on the floor may not notice an overhead crane or its moving load until it is close to their work area.

    RAILHEAD ADVANTAGE
    The RH-CRANELIGHT uses a 72 W LED light to project a red spot or line. A lens cover selects the beam pattern, allowing the warning to suit the application.

    CUSTOMER IMPACT
    Makes crane activity easier to recognize from the floor and reinforces awareness of the lifting area.

View Product
Trainman Lantern Rechargeable Kit — 6 Batteries, Charging Base, 2 A Adapter Trainman Lantern — Patented Break-Away Handle, 650 lm, IP66, 50 hr runtime, 2,667 ft Beam
RH-TL2022-R-2A

Feature:

  • Everything that makes Railhead’s patented trainman’s lantern safer and easier to use — now with a rechargeable power system.
    Rail work is full of snag points: ladders, grab irons, tight clearances, and rolling equipment. Railhead’s patented breakaway handle is designed to separate under abnormal load, allowing the lantern to come free instead of becoming a tether to the worker.
    The rechargeable version adds six rechargeable C-cell batteries, two battery cages, a charging base, and 2A wall charger while retaining compatibility with standard alkaline C-cell batteries. The drop-and-go charging dock eliminates the need to remove individual batteries.
    With 650 lumens, an industry-leading 2,667 ft beam throw, 50+ hours of runtime, an IP66-rated housing, magnetic base, 8-position ratcheting handle, photoluminescent rubber bezel, and integrated battery indicator, it delivers the same railroad-built performance with the convenience of rechargeable power.
    Roughly 35% lighter than a standard 6 V lantern, it is built to reduce battery waste, simplify charging, and keep crews ready for the next shift.
    Patented design. Breakaway handle. Rechargeable power. Photoluminescent rubber bezel. Industry-leading beam throw. Magnetic base.

View Product
Rechargeable Battery Kit — 6 C Cells, Battery Cage, Charging Base, 2 A Adapter
RH-TLRBATKIT-6B-2A

Feature:

  • Convert compatible Railhead lanterns to rechargeable power with one complete, drop-and-go charging system.
    The RH-TLRBATKIT-6B-2A Rechargeable Battery Kit includes six rechargeable C-cell batteries, a battery cage, charging base, and 2A wall charger. Instead of removing batteries individually, crews can place the battery cage directly into the charging base for simple, repeatable charging between shifts.
    With 5,000 mAh Ni-MH batteries, modular components, and individual replacement parts available, the system provides a practical way to reduce disposable battery use and simplify lantern charging across the fleet.
    Rechargeable power. Drop-and-go charging. Fleet-ready design.

View Product
RECHARGEABLE DUAL-BEAM INDUSTRIAL HEADLAMP WITH SMART SWITCH — 800 LM, IPX4, 13 HR RUNTIME
RH-HL800R

Feature:

  • The RH-HL800R is a rechargeable dual-beam industrial headlamp for crews that need both long reach as well as broad task light from a single low-profile unit. Separate SPOT and FLOOD optics run individually or together for up to 800 lumens, with the spot beam reaching 627 ft (191 m) and the low settings extending runtime to 13 hours. A Smart Switch dims output from 100% to 5%, a memory function recalls the last setting used, and a keylock prevents accidental activation.

View Product
Par56 Headlight 75v 350w Halogen Dual Filament
RH-PAR56-75V-HDF

Feature:

  • Par56 Headlight 75v 350w Halogen Dual Filament

View Product
RH ETL Accessory Kit
RH-ETL-KIT

Feature:

  • RH ETL Accessory Kit

    Enhance the functionality and versatility of our Railhead electrician’s test light or circuit tester. Test more safely! 5 ft  Extension Cable, 2 Probes, 2 Alligator Clips, 3 2A Fuses & Pouch

View Product