Feature:

• The Railhead KE-FL40 is a heavy-duty industrial flashlight built for the long jobs — night watch, standing protection, a truck kit that has to work months after it was last picked up. The impact-resistant body is drop-tested to 3.3 ft (1 m) and sealed to IPX4, and an aluminum heatsink pulls heat off the LED to extend its life. The KE-FL40 delivers a steady 150 lumens with a beam reaching 443 ft, and up to 20 hours of continuous run time on a pair of D cells. Simple On / Off operation through a heavy-duty push button you can work with gloves on. Runs on (2) D cell alkaline batteries (not included).
  
  

Feature:

• The Railhead RH-RT1000R is a compact rechargeable right-angle light built for shove moves, rail inspection, and hands-free field work. The heavy-duty aircraft-grade aluminum body is drop-tested to 3.3 ft (1 m) and sealed to IPX4. The RH-RT1000R delivers up to 1,300 lumens with a focused beam reaching 945 ft, or up to 83 hours of continuous run time on Low. 2 modes are provided, High / Low, and holding the switch dims the output. A full-time battery level indicator is built into the push-button switch, so you always know when it's time to recharge. A magnetic base and magnetic clip lock it to railcars, knuckles, and any steel surface, and the body clip carries it on a vest or pocket. Ships with (2) 18650 lithium-ion rechargeable batteries, a charging base, and cable.

Feature:

• The Railhead RH-PWL-210 is a small, light dual pocket work light — two lights in one. A focused 75-lumen flashlight reaches 249 ft for distance, and a 150-lumen COB work light throws wide, close-range area light on the task in front of you. The impact-resistant ABS housing is drop-tested to 3.3 ft (1 m) and sealed to IPX4. The RH-PWL-210 delivers up to 7.3 hours of continuous run time on the flashlight and 2.1 hours on the COB. 2 modes are provided, Flashlight / COB. A magnetic base and side hold it to steel for hands-free work, and a pocket clip carries it between jobs. Runs on (3) AAA batteries (not included).
  
  

Feature:

• The Railhead RH-FL550 is a crush-resistant, submersible, focus-adjustable flashlight built for the job where a dropped light gets stepped on, kicked under equipment, and driven over. Thanks to the crush-resistant steel core inside an impact-resistant polycarbonate body with rubber drop bumper — it survives being ran over by delivery trucks. It is IP68 dust-tight and submersible, up to 6 hours under water, and drop-tested to 10 ft (3 m), the toughest rating in the Railhead line. The RH-FL550 delivers up to 650 lumens in a 15-second Turbo burst, 550 lumens sustained, or up to 9.5 hours of continuous run time on Low. 4 modes are provided, Turbo / High / Low / Off, and the focus control adjusts the beam from a tight spot to a wide work flood. A large rubber switch is easy to find with wet gloves. Hand strap included. Runs on (3) AAA alkaline batteries (not included).
  
  
  

Feature:

• The Railhead PL-160R is a small, light rechargeable aluminum pen light for inspection and maintenance. The compact aircraft-grade aluminum body clips into a pocket, and it is drop-tested to 3.3 ft (1 m) and sealed to IPX4. The PL-160R delivers up to 400 lumens in a 10-second Turbo burst, 330 lumens on High with a beam reaching 430 ft, or up to 15 hours of continuous run time on Low. 3 modes are provided, Turbo / High / Low. A charge indicator tells you when it's ready, and there are no batteries to stock — the integrated lithium-ion battery recharges with the included cable.

Feature:

• The Railhead RH-ISFL200 is an intrinsically safe industrial flashlight for hazardous locations. It is UL co-listed for Class I, Divisions 1 & 2, Groups A–D; Class II, Divisions 1 & 2, Groups E–G; and Class III with a T4 temperature code, and carries ATEX (II 1 G Ex ia IIC T4) and IECEx (Ex ia IIC T4 Ga) Zone 0 approvals and MSHA approval for methane-air mixtures, so it can be carried where flammable gas, vapor, or dust may be present. The sealed body is IP68 rated to 9.8 ft (3 m) submersion and drop-tested to 3.3 ft (1 m), with a high-impact lens, a magnetic control switch, and a safety lock that prevents accidental operation. A locking fastener secures the lamp cap so batteries cannot be changed in hazardous areas, and a relief valve vents hydrogen gas pressure from the enclosure. The RH-ISFL200 delivers up to 180 lumens from its Cree XP-G2 LED with a beam reaching 384 ft, or up to 36 hours of continuous run time on Low. 4 modes are provided, High / Low / Flash / Off. A removable clip is included. Runs on (4) AA alkaline batteries (not included).

Feature:

• The NiteGear RHN-PL300R is a pen-sized rechargeable focus control flashlight. The 6-inch, 0.6-inch-diameter body rides in a shirt pocket, and it is drop-tested to 3.3 ft (1 m) and sealed to IPX4. The RHN-PL300R delivers up to 300 lumens with a beam reaching 226 ft, or up to 10 hours of continuous run time on Low. 3 modes are provided, High / Medium / Low, and a slide focus takes the beam from flood to spot in one motion. The integrated 600 mAh lithium-polymer battery recharges over USB-C with the included cable.

Feature:

• The NiteGear RHN-KL300R is a small, light rechargeable keychain light. At 2.4 inches it lives on a key ring, yet the body is drop-tested to 6.6 ft (2 m) and sealed to IPX4. The RHN-KL300R delivers up to 300 lumens on Turbo, 220 lumens on High, or up to 8 hours of continuous run time on the breathing flash. 7 modes are provided — Flashlight Turbo / High / Medium / Low, and a 60-lumen side floodlight with High / Low / Breathing flash. A magnetic base holds it to steel for hands-free light. The integrated 200 mAh lithium-polymer battery recharges over USB-C with the included cable.

Feature:

• The NiteGear RHN-1750R is a flexible rechargeable work light with dual magnets for hands-free positioning. Bend the flexible arm with integrated COB LEDs to put light where the work is, and two magnets hold it there on any steel surface. A flashlight in the head of the flexible arm adds a directional spot for reading a tag, checking a fitting, or looking into a housing without moving the light. The product is IP65 dust-tight and water-resistant and drop-tested to 6.6 ft (2 m). The RHN-1750R delivers up to 1,750 lumens with the 1,700-lumen COB floodlight and 100-lumen flashlight running together, or up to 15 hours of continuous run time on the flashlight alone. 4 modes are provided, Floodlight High / Floodlight Low / Flashlight / Flashlight + Floodlight. Two integrated 2,600 mAh 18650 lithium-ion batteries are included.

Feature:

• The Railhead Switchman's Stick is three lights in one pocket-sized stick: a signal light, a flashlight, and a work light. A crew member on the ground often needs more than one light at once — a beam to see the work, a wide flood to light the area or the jobsite, and a signal to be seen and understood — and carrying them separately means more to lose and a hand tied up when it should be free. The Switchman's Stick puts all three in one hand. A side-mounted floodlight throws 238 lumens of wide area light across 82 ft as a work light, an end-mounted flashlight puts a 200-lumen spot out to 190 ft, and the signal light gives hand signals and protection a color the whole crew recognizes. Signal light is available in red (RH-SSR-200), blue (RH-SSB-200) or clear (RH-SSC-200). The impact-resistant, hi-viz body is IP67 dust-tight and submersible and drop-tested to 6.6 ft (2 m). It delivers up to 20 hours of continuous run time on the flashlight and 6.5 hours on the floodlight. Two strong integrated magnets lock it to a car body, truck, or signal at any angle to free both hands. An attached wrist lanyard keeps it close; all versions include a belt clip. Runs on (4) AAA alkaline batteries (not included).
  
  

Feature:

• The Railhead RH-UV2000 is a small, light ultraviolet pen light for finding what a work light can't. Under its 395 nm UV, dye-traced fluids fluoresce, and a hydraulic weep or coolant seep that was invisible becomes obvious — for HVAC and refrigeration, automotive and fleet diagnostics, aviation maintenance, and forensic or document inspection. The aircraft-grade aluminum body with impact-resistant polycarbonate and rubber drop bumper is drop-tested to 6.6 ft (2 m) and sealed to IPX4. The RH-UV2000 delivers 325 mW of regulated output that holds steady across battery life, with up to 2.75 hours of continuous run time. Simple On / Off operation through a positive mechanical switch, a metal clip for carry, and a purple UV cap so it's unmistakable in a bag. Runs on (2) AAA alkaline batteries (not included)

Feature:

• The Railhead Switchman's Stick is three lights in one pocket-sized stick: a signal light, a flashlight, and a work light. A crew member on the ground often needs more than one light at once — a beam to see the work, a wide flood to light the area or the jobsite, and a signal to be seen and understood — and carrying them separately means more to lose and a hand tied up when it should be free. The Switchman's Stick puts all three in one hand. A side-mounted floodlight throws 238 lumens of wide area light across 82 ft as a work light, an end-mounted flashlight puts a 200-lumen spot out to 190 ft, and the signal light gives hand signals and protection a color the whole crew recognizes. Signal light is available in red (RH-SSR-200), blue (RH-SSB-200) or clear (RH-SSC-200). The impact-resistant, hi-viz body is IP67 dust-tight and submersible and drop-tested to 6.6 ft (2 m). It delivers up to 20 hours of continuous run time on the flashlight and 6.5 hours on the floodlight. Two strong integrated magnets lock it to a car body, truck, or signal at any angle to free both hands. An attached wrist lanyard keeps it close; all versions include a belt clip. Runs on (4) AAA alkaline batteries (not included).